U-BOND 309 TFC is a one-component, solvent-free, moisture-curing, fast-setting, transparent PUR adhesive suitable for bonding wood and building materials in joinery and exterior assembly with high mechanical resistance due to its excellent resistance to water, temperature, weathering and ageing conditions according to EN 204 D4. Applications: cable applications, exterior applications for woodworking, building, construction and carpentry, bonding of wood and wood products (plywood, chipboard, ...), chemical anchoring of building structures, bonding of stone, plasterboard, cement surface, bricks, ceramics, bonding of insulation panels, materials including expanded polystyrene and polyurethane sheets, bonding of metal structures (aluminum, stainless steel, galvanized steel, copper), bonding of corner joints in the manufacture of metal doors + windows, facades, bonding of synthetic materials (PVC, reinforced plastics, ...). Advantages: fast curing, excellent adhesion to various substrates, easy to use, solvent and odour free, resistant to ageing, chemicals, weathering according to DIN 204 D4, low foaming with good filling properties.

U-BOND 307 is a one-component, moisture-cured, fast-setting PUR adhesive which, once cured, transforms into an adhesive with strong adhesion and high resistance to water, temperature, weathering and ageing according to EN 204 D4. Short open time for fast handling. Application: extra strong bonding of wood and wood products (plywood, chipboard, ...), chemical anchoring of building structures, bonding of stone, plasterboard, cement surface, brick, ceramics, bonding of insulation panels, materials including expanded polystyrene and polyurethane plates, extra strong bonding of metal structures (aluminum, stainless steel, galvanized steel, copper), bonding of corner joints in the manufacture of metal doors + windows, facades. Advantages: bonding of synthetic materials, PVC, fibre-reinforced plastics, excellent adhesion to various substrates, easy to use, solvent and odour free, resistant to ageing, chemicals, weathering according to DIN 204 D4, low foaming with good filling properties.

KESTOPUR 1050 is a moisture curing single component PUR adhesive. It meets the requirements of EN 15425, is approved for the manufacture of products with CE marking according to EN 14080 Timber structures - glued laminated timber and glued solid timber, EN 15497 Structural solid timber with wedge joint (zinc), EN 16351 Timber structures - CLT. It can also be used for the manufacture of other wood products and applications that require exceptional moisture resistance. KESTOPUR 1050 does not contain solvents or formaldehyde. Conforms to M1 emissions of the Building Materials Classification. Reinforced with fibre. Low foaming.

KESTOPUR 1030 is a moisture curing single component PUR adhesive. It meets the requirements of EN 15425, is approved for the manufacture of products with CE marking according to EN 14080 Timber structures - glued laminated timber and glued solid timber, EN 15497 Structural solid timber with wedge joint (zinc), EN 16351 Timber structures - CLT. It can also be used for the manufacture of other wood products and applications that require exceptional moisture resistance. KESTOPUR 1030 does not contain solvents or formaldehyde. Conforms to M1 emissions of the Building Materials Classification. Reinforced with fibre. Low foaming.

KESTOPUR 1010 is a moisture curing single component PUR adhesive. It meets the requirements of EN 15425, is approved for the manufacture of products with CE marking according to EN 14080 Timber structures - glued laminated timber and glued solid timber, EN 15497 Structural solid timber with wedge joint (zinc), EN 16351 Timber structures - CLT. It can also be used for the manufacture of other wood products and applications that require exceptional moisture resistance. KESTOPUR 1010 does not contain solvents or formaldehyde. Conforms to M1 emissions of the Building Materials Classification. Reinforced with fibre. Low foaming.

KESTOPUR G10 is a moisture curing single component PUR adhesive for bonding wood. The adhesive has been tested by the independent testing laboratory MPA University in Stuttgart and complies with EN 15425: 2017 I 70 GP 0.3 (Type I adhesive) requirements for spruce, pine and fir. KESTOPUR G10 is approved for the manufacture of CE marked products according to EN 14080 Timber Structures - Glued laminated timber and glued laminated solid timber, EN 15497 Structural solid timber with wedge joint (zinc), EN 16351 Timber Structures - CLT. It can also be used for the manufacture of other wood products and applications that require exceptional moisture resistance, optimum for stumping, short pressing time, long open time, contains no fibers, solvents or formaldehyde, complies with the M1 emission classification of building materials.

AG-PUR K 222 is a liquid one-component moisture curing adhesive for industrial use.

NEOPUR M 2238 RRR is a liquid one-component moisture curing polyurethane-based adhesive for the manufacture of sandwich panels. It is used for bonding insulation cores (XPS, EPS, PU, mineral wool, ...), external materials (wood, aluminum, gypsum, polyester, plastic materials, ...). When processed professionally, products bonded with this adhesive meet the requirements of resistance group D4 according to DIN - EN 204. Excellent resistance to low and high temperatures. Excellent resistance to organic solvents. High resistance to hydrolysis.

NEOPUR M 2238 RR is a liquid one-component moisture curing polyurethane-based adhesive for the manufacture of sandwich panels. It is used for bonding insulation cores (XPS, EPS, PU, mineral wool, ...) to external materials (wood, aluminium, plaster, polyester, plastic materials, ...). When processed professionally, products bonded with this adhesive meet the requirements of resistance group D4 according to DIN - EN 204. Excellent resistance to low and high temperatures. Excellent resistance to organic solvents. High resistance to hydrolysis.

NEOPUR M 2238 is a liquid one-component moisture curing polyurethane-based adhesive for the manufacture of sandwich panels. It is used for bonding insulation cores (XPS, EPS, PU, mineral wool, ...), external materials (wood, aluminum, gypsum, polyester, plastic materials, ...). When processed professionally, products bonded with this adhesive meet the requirements of resistance group D4 according to DIN - EN 204. Excellent resistance to low and high temperatures. Excellent resistance to organic solvents. High resistance to hydrolysis.